Same-Day Service Available
Need a Plumber in Knoxville? We’re Ready to Help!
If you have a faucet that leaks, drips, squeaks, or never quite shuts off, it is more than a small annoyance. That constant drip can waste gallons of water, raise your utility bill, and stain sinks, tubs, and countertops. Hidden leaks under the sink can also damage cabinets and flooring before you notice a problem.
Many Knoxville homes have older faucets, hard water buildup, or DIY fixes that did not last. At some point, it becomes safer and more cost-effective to repair the faucet correctly or replace it with a new, efficient fixture.
Tennessee Standard Plumbing provides residential faucet repair and installation in Knoxville, TN. Our licensed plumbers diagnose the issue, repair worn parts when it makes sense, and install new faucets when replacement is the better long-term choice.
Do not let a small leak turn into water damage. Contact us today to schedule faucet service and get reliable fixtures that work the way they should.




Faucets play a daily role in your kitchen, bathrooms, laundry room, and outdoor spaces. When they do not work properly, it affects comfort and convenience and can lead to damage around sinks and counters. A worn faucet can waste water, cause low or uneven pressure, and let moisture reach hidden areas inside cabinets or behind sinks.
In Knoxville, hard water often leaves mineral deposits inside faucets and cartridges, which can lead to stiff handles, uneven flow, and leaks around the base or spout. Older fixtures may also be outdated or lack helpful features like single-handle control, pull-down sprayers, or water-saving aerators.
Professional faucet repair or replacement in Knoxville helps cut water waste, protect surfaces from moisture, improve flow and temperature control, and refresh the look and function of your home so your fixtures work reliably day after day.

Some faucet problems are obvious, while others build up slowly over time. These signs suggest it is time to call a plumber instead of living with the issue or trying another quick fix.

If your faucet continues to drip after you turn it off, the internal parts may be worn or damaged. Over time, that steady drip can waste a lot of water and leave mineral stains in the sink or tub.

Puddles, damp spots, or water stains on the countertop or inside the cabinet can point to leaks at the faucet base, supply lines, or connections. Left alone, this can swell wood and damage finishes.

Stiff, hard-to-turn, or wobbly handles can signal worn cartridges, stems, or internal seals. Loose handles can eventually stop shutting the water off fully.

If the faucet spits, sprays sideways, or has weaker flow than before, mineral buildup or internal damage may be the cause. Sometimes cleaning the aerator helps, but deeper issues may call for repair or replacement.

Rust, flaking metal, or peeling finishes are signs that the faucet is near the end of its service life. At that point, replacement often makes more sense than repeated repairs.

If you have replaced washers, cartridges, or handles more than once and the faucet still acts up, it may be more practical to install a new fixture that will perform better and last longer.
A visit from Tennessee Standard Plumbing can help you decide whether faucet repair or new faucet installation is the better choice for your Knoxville home.


If something goes wrong with our workmanship, we make it right—no excuses, no runaround, even if it means covering the cost ourselves.

You’ll always receive multiple options and a clear price before any work begins. Once you approve, that price won’t change.

We respect your schedule. If we miss our arrival window, we waive the service fee.
Working with a qualified plumbing team for faucet work does more than stop a drip. It helps protect your home, your fixtures, and your time.
Tennessee Standard Plumbing brings the same attention to detail to faucet repair and installation that we bring to larger plumbing projects. If you need help with a dripping faucet, a broken handle, or a full upgrade to new fixtures in your Knoxville home, our team is ready to provide solutions that last and service that puts your comfort first.


“ I feel comfortable calling and sending Tennessee Standard in my house to fix a problem. He respected my home just like I do. To us, Tennessee Standard is the gold standard.”
Even a slow drip can waste hundreds of gallons of water per year, and faster leaks can reach into the thousands. This extra water use shows up on your utility bill and can leave stains or mineral buildup in your sink or tub.
Most standard faucet repairs can be completed in under an hour once the plumber is on site. A full faucet replacement usually fits into a single visit, unless there are complications such as damaged shut-off valves or hidden water damage.
You can do either. Many homeowners purchase a faucet that matches their style and have the plumber install it, while others prefer to choose from models the plumbing company recommends to fit their sink, needs, and budget.
In many cases, yes. While working on the faucet, plumbers often inspect the shut-off valves and flexible supply lines and may recommend replacing them if they are old, corroded, or leaking.
A minor drip that falls directly into the sink is usually not an emergency, but it should be repaired soon to avoid wasted water and further wear on the faucet. If you see water pooling around the base or inside the cabinet, turn off the shut-off valves under the sink and avoid using that faucet until a plumber checks it.